GENERAL: G-2000 is a unique, revolutionary Thermoplastic Acrylic metal cross linked
copolymer- Polyurethane modified, formulated to give significantly superior total performance
than conventional floor finishes. This product is designed to withstand the friction of Super High
speed floor machines. G-2000 offers outstanding qualities such as: “Wet Look” high gloss,
resistance to black heel marking, scuffing and powdering. Moreover, this product gives good
levelling, fast recoatability and provides an excellent balance of detergent resistance and
removability.
USE: G-2000 is recommended for vinyl asbestos, asphalt tile, terrazzo, linoleum, ceramic,
marble and concrete floors. This product is an ideal floor finish for cafeterias, stores,
supermarkets, elevators, elevator lobbies, banks, schools, hospitals and other locations where
low maintenance factors are primary concern.
The high anti-slip properties make this product an ideal finish for gym floors in school.
DIRECTIONS: Strip floor thoroughly of old wax or finish. Rinse with clean water and allow to
dry. Apply up to three thin coats with a mop allowing approximately 15-25 minutes between coats.
MAINTENANCE: Dust and/or damp mop as required. G-2000 can be cleaned many times
with a mild or neutral detergent without loss of beauty and protection. The floor may be buffed,
spray buffed or burnished, depending on the system utilized, twenty four hours after application.
CHEMICAL AND PHYSICAL SPECIFICATIONS:
– % Solids by Weight:18.2 ± 0.2
– PH: 8.7 ± 0.5
– Density: 1.015 ± 0.01 at 250C
– Physical apperance: Opaque liquid
– Odour: Polymeric-free from objectionable odour
– Stability-shelf life: Stable(12) twelve months at 210C, (1) one month at 480C
– Freeze-thaw stability: 3 cycles
– Viscosity at 250C: 5-15 CPS(Brookfied)
– Colour of film: Colourless
– Drying time at 210C: 15-25 minutes
– Heel mark resistance: Excellent
– Water resistance: Excellent
– Gloss: Excellent-self polishing
– Coverage: 1st coat 50-80 sq. meters/litre, 2nd coat 70-110 sq. meters/litre
OTHER PROPERTIES: High standards of anti-slip, high resistance to yellowing, resistance to
water spotting and powdering.
G-2000 Thermoplastic Floor Finish-25% solids 4 lit
Ordered:0
Items available:2000
- G-2000 is a Thermoplastic Acrylic metal cross linked copolymer-Polyurethane modified product designed to provide superior total performance than conventional floor finishes.
- This product offers a “Wet Look” high gloss, resistance to black heel marking, scuffing, and powdering with good levelling and fast recoatability.
- It is ideal for vinyl asbestos, asphalt tile, terrazzo, linoleum, ceramic, marble and concrete floors in locations like cafeterias, stores, supermarkets, hospitals, and schools where low maintenance is crucial.
- G-2000 is also a perfect finish for gym floors in schools due to its high anti-slip properties.
- This product can be cleaned multiple times with a mild or neutral detergent without losing its beauty and protection.
- Download SDS Sheet here: G-2000
Description
SKU:
505-2091
Categories: Cleaning & Janitorial, Cleaning Chemicals
Tags: anti-slip, floor finishes, high gloss, low maintenance, Polyurethane modified, Thermoplastic Acrylic
Related Products
GRIME EATER® Lime Solvent Free with Pumice Hand Cleaner
SKU:
501-2004-2-1-1
Login to see prices
1999 in stock
Fantastik Original All-Purpose Disinfectant Cleaner
SKU:
505-2023S
Login to see prices
2000 in stock
Betco Sure Cure Acrylic Urethane Sealer & Finish, 3.78L
SKU:
505-2022-1
Login to see prices
2000 in stock